Research articles and publications

This section provides a comprehensive list of the research articles and publications from the SMaRT Centre in relation to its many programs and projects. Visit specific web pages for individual programs to see research outcomes for those programs.

Journal articles

  • Citation
    Hong L; Sahajwalla V, 2016, 'Reaction between Steel-Making Slag and Carbonaceous Materials while Mixing with High Density Polyethylene', High Temperature Materials and Processes, 35, pp. 65 - 71, http://dx.doi.org/10.1515/htmp-2014-0122
    2016

  • Citation
    Hossain R; Pahlevani F; Quadir MZ; Sahajwalla V, 2016, 'Stability of retained austenite in high carbon steel under compressive stress: An investigation from macro to nano scale', Scientific Reports, 6, http://dx.doi.org/10.1038/srep34958
    2016

  • Citation
    Ikram-ul-Haq M; Khanna R; Sahajwalla V, 2016, 'Interfacial reactions between alumina and carbon refractories and molten iron at 1,823 K', High Temperature Materials and Processes, 2015, http://dx.doi.org/10.1515/htmp-2015-0127
    2016

  • Citation
    Joshi RK; Shukla S; Saxena S; Lee G-H; Sahajwalla V; Alwarappan S, 2016, 'Hydrogen generation via photoelectrochemical water splitting using chemically exfoliated MoS2 layers', AIP Advances, 6, pp. 15315 - 15315, http://dx.doi.org/10.1063/1.4941062
    2016

  • Citation
    Kumar A; Choudhary V; Khanna R; Tripathi SN; Ikram-Ul-Haq M; Sahajwalla V, 2016, 'Structural, thermal, morphological and dynamic mechanical characteristics of waste-reinforced polypropylene composites: A novel approach for recycling electronic waste', Journal of Applied Polymer Science, 133, http://dx.doi.org/10.1002/app.43389
    2016

  • Citation
    Kumar A; Khanna R; Ikram-Ul-Haq M; Spink J; Sahajwalla V, 2016, 'Corrosion Behavior of Al2O3-C Refractories with Casting Mould Meniscus Slags at 1 550 °c', Steel Research International, 87, pp. 46 - 56, http://dx.doi.org/10.1002/srin.201400590
    2016

  • Citation
    Li K; Bouhadja M; Khanna R; Zhang J; Liu Z; Zhang Y; Yang T; Sahajwalla V; Yang Y; Barati M, 2016, 'Influence of SiO2 reduction on the local structural order and fluidity of molten coke ash in the high temperature zone of a blast furnace. A molecular dynamics simulation investigation', Fuel, 186, pp. 561 - 570, http://dx.doi.org/10.1016/j.fuel.2016.08.107
    2016

  • Citation
    Mayyas M; Mayyas M; Pahlevani F; Liu Z; Rajarao R; Sahajwalla V, 2016, 'From automotive shredder residue to nano-ceramics and graphitic carbon—Thermal degradation kinetics', Journal of Analytical and Applied Pyrolysis, 120, pp. 60 - 74, http://dx.doi.org/10.1016/j.jaap.2016.04.010
    2016

  • Citation
    Mayyas M; Pahlevani F; Handoko W; Sahajwalla V, 2016, 'Preliminary investigation on the thermal conversion of automotive shredder residue into value-added products: Graphitic carbon and nano-ceramics', Waste Management, 50, pp. 173 - 183, http://dx.doi.org/10.1016/j.wasman.2016.02.003
    2016

  • Citation
    Molkeri A; Pahlevani F; Emmanuelawati I; Sahajwalla V, 2016, 'Thermal and mechanical stability of retained austenite in high carbon steel: An in-situ investigation', Materials Letters, 163, pp. 209 - 213, http://dx.doi.org/10.1016/j.matlet.2015.10.083
    2016

  • Citation
    Nair A; Vineesh T; Thomas S; Sahajwalla V; Joshi RK; Alwarappan S; Kalarikkal N; Kala M, 2016, 'Boron doped graphene wrapped silver nanowires as an efficient electrocatalyst for molecular oxygen reduction', Scientific Reports, 6, http://dx.doi.org/10.1038/srep37731
    2016

  • Citation
    Pahlevani F; Dippenaar R; Gorjizadeh N; Cholake ST; Hossain R; Kumar R; Sahajwalla V, 2016, 'Surface Modification of Steel Using Automotive Waste as Raw Materials', Procedia Manufacturing, 7, pp. 387 - 394, http://dx.doi.org/10.1016/j.promfg.2016.12.007
    2016

  • Citation
    Pahlevani F; Kumar R; Gorjizadeh N; Hossain R; Cholake ST; Privat K; Sahajwalla V, 2016, 'Enhancing steel properties through in situ formation of ultrahard ceramic surface', Scientific Reports, 6, http://dx.doi.org/10.1038/srep38740
    2016

Book Chapters

  • Citation
    Khanna R, 2016, 'Environmental Impact of Processing Electronic Waste: Key Issues and Challenges', in Electronic Waste, Intech, Croatia
    2016

  • Citation
    Maroufi S; Mansuri I; O'Kane P; Skidmore C; Jin Z; Fontana A; Zaharia M; Sahajwalla V, 2016, 'Waste to Value in Steelmaking', in Advances in Molten Slags, Fluxes, and Salts, John Wiley & Sons, Inc., pp. 1 - 15, http://dx.doi.org/10.1002/9781119333197.ch1
    2016

  • Citation
    Maroufi S; Mansuri I; O’Kane P; Skidmore C; Jin Z; Fontana A; Zaharia M; Sahajwalla V, 2016, 'Waste to Value in Steelmaking', in Advances in Molten Slags, Fluxes, and Salts: Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts 2016, Springer International Publishing, pp. 3 - 15, http://dx.doi.org/10.1007/978-3-319-48769-4_1
    2016

Conference Papers

  • Citation
    Maroufi, S. ; Mansuri, I. ; O’Kane, P. ; Skidmore, C. ; Jin, Z. ; Fontana, A. ; Zaharia, M. ; Sahajwalla VH, 2016, 'Waste to Value in Steelmaking', in Proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts 2016, Seattle, USA, pp. 3 - 15, presented at 10th international Conference on Molten Slag, Fluxes and Salts, TMS (The Minerals, Metals & Materials Society), Seattle, USA, 22 May 2016 - 25 May 2016, http://dx.doi.org/10.1007/978-3-319-48769-4
    2016